Pulse Builds on Kodi 17 Krypton

One of the most popular builds on Kodi is now available for Krypton. Pulse CCM. The navigation will be familiar with most Kodi build users and it is quick to get around which will get you on your chosen content quickly. The movie and TV Show widgets are helpful and there is a good category choice with plenty of the top add-ons included. It's very easy to include your own add-ons and favourites into the build which gives you a lot of custom choices. It's a simple and straight forward kind of build but it just does everything exceptionally well. Pulse Build support can be found on the Ares forum. When installing from Ares Wizard you will need to enter the pin upon request. You will be prompted for it.


You can leave feedback below (good or bad) for the benefit of all our readers. Thanks.

Pulse Builds

  • Pulse CCM (257mb zipped)

How to install Pulse Builds on Kodi 17 Krypton

  • Kodi 17 Krypton download.
  • HOME Screen > Add-ons > Settings button > Enable Unknown Sources.
  • BACK to HOME screen > Settings button > File Manager > Add Source.
  • Enter http://repo.ares-project.com/magic/ in the top box > Enter Ares in the bottom box > OK.
  • BACK to HOME screen > Add-Ons > Add-on Browser
  • Install from zip file > Ares > repository.aresproject/ > repository.aresproject.zip.
  • Wait for Add-on enabled notification.
  • Install from repository > Pulse PROJECT > Program add-ons > Ares Wizard > Install.
  • Wait for Add-on enabled notification.
  • Ares Wizard is now installed and ready to use.
  • You will need to get and enter a PIN when prompted - just click the link when you see it.
  • BACK to HOME screen > Add-ons > Program Add-ons > Ares Wizard > Browse Builds > Pulse > Select Your build > Install
  • The build will now download
  • Wait for download > Force close > Power off if required.
  • On reboot - WAIT! It can take 5 mins to fully update. Go grab a beer.
  • Congratulations, Pulse Build is now installed and ready to use.

This build is a third party build and is NOT supported by the Kodi/XBMC foundation. Please do not post questions on the forum.kodi.tv website relating to this build.

  • Access all Kodi add-ons with Ipvanish: / Access Kodi anonymously
  • Android TV Compatible
  • Secure Access to ALL Kodi Add-Ons
  • Fastest Streaming Speeds
  • Prevent ISP Throttling
  • Hide Your IP Address
  • Zero Activity Logs
  • IPVanish offer a FREE no obligation 7 day trial.

  • Visit IPVanish for more information.

    Comments

    T - How do you add the adult!* Every time i add it it shuts down ,will not open and I have to reset my entire firestick.. (20th Jun 2017) reply
    geordie - why do i need a pin and where do i get one (19th Jun 2017) reply
    Admin (Kodiapps) - When you download from Ares iT Will give you an option get pin. Just click on that And a new window Will open, giving you the pin. Just go back And enter that pin And you are set to go! (19th Jun 2017) reply
    JR - It really needs to be update with everything that has happened in the Kodi community the past few weeks. A number of addons have closed down. (19th Jun 2017) reply
    Admin (Kodiapps) - Build was updated 14-06-2017. Please first do a fresh start And then install from Ares wizard as in description (19th Jun 2017) reply
    Help with Pulse install using ares wiz - I have tried at least 8 times to install Pulse CCM for Krypton using ares-wiz and clearing cache each time...but right at the very end install freezes. I force close or unplug and try again...same. I make sure connection is solid..good. What am I to do* (16th Jun 2017) reply
    William Price - I have setup local weather...do not see it displayed on home screen...help (9th Jun 2017) reply
    Admin (Kodiapps) - On YouTube there are lots of tutorials with step by step instructions. Here is one of them https://youtu.be/moTug1k3dkU hope this Will get you sorted. Pulse is on Band now (Its like Facebook) download band through the playstore. (19th Jun 2017) reply
    Mark - I am trying to get this to work on 17.3 and have tried 3 times. The Build installs but after opening Kodi, I get the Pulse screen then it defaults to what looks like a Fresh install of Kodi* Ive looked in Interface Settings to see if the skin was changed back but there is no skin for this Build but I see the rolling ticker at the bottom and if I go into File Manager there are a lot of repositories * Very very strange. Happening on Firestick (27th May 2017) reply
    John - Im having the same issue. Did you ever find a solution? Ive been searching the net for a week looking for answers without any luck. Id be curious if youve found anything (1st Jun 2017) reply
    Pulse - RE run Ares Wizard, once build has downloaded and extracted youll get the option to back up skin, select no and this should install the build correctly. (9th Jun 2017)
    Brian - Also having this issue. 0 for 2 so far. (5th Jun 2017) reply
    Gaddo - Im having the same problems with Kodi 17.3 pulse not loading up. I even tried loading the 2nd pulse krypton link and that doesnt work either. So I deleted kodi 17.3 completely and installed kodi 17.1. But now when I launch pulse its just a blank screen. I guess kodi found a way to block the pulse build. I dont know why I never bothered to update. My pulse build was running fine on 17.1. Hopefully this will get fixed soon. (7th Jun 2017) reply
    pokee - no ...its working well...but not on 17.3.....17.3 the skin is not applicate on it...need from pulse to update thier skin for 17.3...all you have to do to get this is to delete the whole kodi ...install 17.1 ..and then through Ares download the pulse CCM krypt (8th Jun 2017) reply
    SP - Couldnt get this to work. Kodi wouldnt open after installing. I love my old Pulse build. Ill try again in a few weeks and see if anything changes. (23rd May 2017) reply
    Admin (Kodiapps) - The Krypton version Will only work on an Android 5 or up device. If your device is Android 4.4 you Will have Kodi Jarvis most likely. You could use Nodi APK (see our APK section), which Can be installed on an Android 4.4 and which Will take a Krypton based build like this one... (23rd May 2017) reply
    Admin (Kodiapps) - Install video for Nodi... https://youtu.be/s7QZSNUXdUs (23rd May 2017)
    Neb - Everything is great except the stupid banner at the top left corner. It covers my weather and it is annoying. On top of it all the team is proud not to tell me how to remove the nuisance. (13th May 2017) reply
    Jeff - Yea, that banner is really fing annoying, but you can get rid of it pretty easily. Do a search in the Home.xml file and comment out the "" and "" sections, and the banner in the upper lefthand corner will go away. (22nd May 2017) reply
    Jeff - It removed portions of my reply in the quotes, but here are the two sections you need to comment out "control type="image" & "control type="multiimage" id="1999" (22nd May 2017) reply
    XeCuTioNR - I tried editing the XML but after I did, black screen the skin...i dont know if i did something wrong but if you can help Jeff (or anyone) I would appricate it. Thanks :) (26th May 2017)
    Admin (Kodiapps) - As fully loaded box Sellers earn money on other peoples hard work, which they provide for free, it is understandable that Some take precautions. Like a banner... ;) If you find it too annoying, it might be best to find another build. There are so many beautiful Builds out there... Enjoy! (26th May 2017) reply
    SQ - Best Build. Use it on all my devices (Rasp Pi, Android, windows) Tried many and I always come back to Pulse. It just friggin works! (8th May 2017) reply
    Hiyella - Just luv the pulse builds (5th May 2017) reply
    Rick - I have Pulse Builds on Kodi 16 Krypton. Can I update to Pulse Builds on Kodi 17 Krypton. HOW (4th May 2017) reply
    Admin (Kodiapps) - By installing an APK like Nodi... https://youtu.be/s7QZSNUXdUs (23rd May 2017) reply
    Hendriks - Nice build...work very good ! (1st May 2017) reply
    EC - Good build (20th Apr 2017) reply
    Frank Bowman - I have been using Pulse for quite sometime, never fails, runs smooth and easy, I changed the number of widgets on each tab to show 75 each time, and added (thru favorites) some packages I like to show up as widgets, like sports premier, movies 2017, kids movies and movies for my wife. Fantastic build that can be customized if you want. (18th Apr 2017) reply
    gk - perfect (17th Apr 2017) reply
    simpleton - this is the perfect build for my mother its a plane jane with lottsa bang very easy to use and has all the basics one could ask for great build thanks again (17th Apr 2017) reply
    Mifeto - Thanks for the great work. The pulse build is perfect everything is just right. (16th Apr 2017) reply
    BeachBum - I appreciate all the work that must go into developing these guides and keeping them current. I tried this on on 17.1 and it didnt work in the order given. I am trying for the third time, hoping that it is just me making mistakes. Thanks. (13th Apr 2017) reply

    Leave a comment

    Let us all know if something isn't working as it should be - thanks.
    What is 7 x 9 =
    Disclaimer - We do not host, upload or link to any video, films, media file, live streams etc. Kodiapps is not responsible for the accuracy, compliance, copyright, legality, decency, or any other aspect of the content streamed from your device.
    Todays Sport on Kodi
    Get all the latest sporting fixtures and channels where they are showing right HERE.
    *UPDATED* Kodiapps now have an app. v6.0 - Available for IOS & Android. You can now add latest scene releases to your collection with Add to Trakt. More features and updates coming to this app real soon.
    Tip : Add http://kodiapps.com/rss to your RSS Ticker in System/Appearance/Skin settings to get the very latest Movie & TV Show release info delivered direct to your Kodi Home Screen. Builders are free to use it for their builds too.
    You can get all the latest TV Shows & Movies release news direct to your Twitter or Facebook. Never miss your fave TV Shows & Movies again. Send a follower request via the social media link.